US Patent No 7,938,163 - Other Patents Pending-

The Connecticut Screen Works Screen Wall
System^® is an innovative  screen system
intended for use in porch enclosures,
large openings or in any other
situation where high quality and
durability are desired. This system is
specifically designed to be one of the
strongest, highest quality, and most
adaptive panel screening systems available.
 

(L to R Below: Installations - Residential Porches)

Connecticut Screen Works Screen Wall System^® panels and screen walls are manufactured to order using our patented proprietary aluminum  extrusions - assembly is rock solid. Our proprietary extruded aluminum corner insert and stainless steel (thread locker coated) assembly hardware form what is probably the strongest screen frame available on the market. The finished assembly is virtually unbreakable. 

We test our panels in house as well as under labratory conditions.
(L to R Below) 400 LB static load with NO damage to frame assembly.

(L to R Below) Labratory Wind Load Testing: 7' W x 12' H panel.
Screen material failure (pull out) at: 135 MPH.
(testing results provided to qualified customers upon request)

(L to R Below: Installation - Lady Luck Casino)
 

(Below) 3-Section Gabel End (Desert Water Agency)

We offer 7 "standard" screen panel layouts.  All are also available as screen walls. (A screen wall is simply a standard or custom screen panel layout that is repeated throughout a single master frame unit) Individual screen panels are available as small as 9" x 9" and screen walls are available as large as 16' x 16'.  Almost limitless design capabilities are available - all layouts can be customized to fit your requirements.

(L to R Below: Installation - Counter Burger Restaurants)

 


(4 photos above right) Our screen panel layout 1: single screen panel, double screen panel wall, triple screen panel wall and quadruple screen panel wall. Larger photo above left: 14' x 12' screen panel layout 5 in a triple panel - screen wall orientation (model 53).

This porch screen and screen enclosure system is designed for use in almost any pre-existing or to be  built structure. This system can be used on porches, decks, balconies, patio areas, etc. System screen panels and screen walls are not intended, nor are they approved, for load bearing installations of any kind. Your roof structure must be fully supported by other means. Additionally, system screen panels and screen walls are not a code compliant safety restraint system. You must have a supported roof and safety rails (if required) in place in order to use this product.

(L to R Below: Installation - Bass Pro Shops / Islamorada Restaurant)

Applications of the Connecticut Screen Works Screen Wall System^® have included:

• Commercial Uses: Outside leisure areas and ventilation systems
• Industrial Uses: Ventilation systems and high flow air intakes
• Libratory Uses: Insectariums and research facilities
• Restaurant Uses: Eating areas and large ventilation openings
• Healthcare Uses: Eating areas and outside leisure areas
• Educational Uses: Eating areas and outside leisure areas
• Residential Uses: Porch Screens, Porch Enclosures, and Garages

The Connecticut Screen Works Screen Wall System^® is not a Home Center bargain product. This
system is a higher end, extremely
high quality screening product
and is priced accordingly. To
consider this system, your budget
must be a minimum of $150.00
per running foot. (A three sided
porch measuring 10x10x10 (or 30
running feet) must have a
minimum budget of $4500.00)
Your budget may need to be far
higher - or lower - based upon
layout ordered, production sizes
and options selected.
 

---

Panel Selection / Standard Layouts...

Our seven standard screen panel layouts are shown below. Click on the links above each screen panel to view specifications, minimum and maximum sizes, etc. for each.
Customization information is also listed on
each layout page. All standard screen
panel layouts can be ordered simply by
providing your true manufacture size. All
internal elements are automatically
adjusted accordingly based upon your
manufacture size. (shown below from L to
R) Standard Layouts 1 through 7 in single panel form.

 

LAYOUT 1	LAYOUT 2	LAYOUT 3	LAYOUT 4

LAYOUT 5	LAYOUT 6	LAYOUT 7
Layout and System Specifications > .pdf File

---

Panel Selection / Custom Layouts...

Beyond our standard layouts, fully custom layouts are also available. Please note that we must approve your design in advance if our facility is to build it.

Contact our sales office for further details. 

 

---

Screen Materials / Options...

Screen panels and screen walls are supplied with 20x20 .008 Charcoal Fiberglass Screen Material at no additional charge.  If the largest panel ordered is over the maximum size for 20x20 .008 we will use 18x14 .013g Charcoal Fiberglass Screen Material. 16x14 .013g PVC Coated Polyester Screen Material (Super Screen) is also available.
 

 

Above Left: 18x14 .013g Charcoal Fiberglass Screen
Above Right: 16X14 .013g PVC Coated Polyester Screen (Super Screen)

 

Above: Super Screen Documentation

   

Screen installation into Master Frame detailed above: (L to R)
Standard screen installation, Upgraded screen installation, and
Optional vinyl installation (in place of screen) below divider extrusion.

---

Manufacturing Options...

• Shipped fully assembled.
• Shipped KD (knocked down).
• Shipped in raw materials form.

---

How to Obtain a Quote or Place an Order...

You can order raw material online or by fax / mail:
WEB STORE  or  FAX or MAIL

Orders for manufactured products must be quoted. Please submit your quote request ONLINE, by FAX or MAIL, or by calling (203.741.0859) or emailing (sales@connscreen.com) our office.  We will not issue written quotations until you email (or fax) full project and contact information.