Screen Wall System - Standard Face Mount | Connecticut Screen Works

Screen Wall Premier Simplicity Snapp Parts Dealers

Porch Screens - Porch Enclosures Screen Panels - Screen Wall

Information Links...

Please Select:

Installation Suggestions...

Proper planning is essential for trouble free installation. Installation of this system can be performed by most skilled persons. A general home improvement contractor will have no problem.

Please Select:

These are by no means all possibilities for installation. Not all mounts we show may work in your situation - in fact, you may find that none do. You may need to utilize a combination of methods or design your own based upon your requirements.

Need Samples ?...

You can order product line samples right through our web store.

Material samples are free of charge. (We do ask that you cover shipping costs)
For a minimal charge we can also provide sample sized manufactured panels.

Order Samples > WEB STORE
Use the "Samples" link located on
the left side of web store pages.

Join Our Email List...

Click Here for Email Updates & News

Be a Fan on Face Book...

Made in USA...

The Connecticut Screen Works Screen Wall System^® is 100% USA made.

Designed and Manufactured exclusively by Connecticut Screen Works, Inc.
- Patents Pending -

US Patent No 7,938,163 - Other Patents Pending-

Standard Face Mount...

MOUNTING LOCATION: Over Openings

CAN INSERTS BE USED: No

This is a simple method that requires no installation channels. This method can be used with both Panels and Walls with little trouble in most cases. Although the details below show a mounting from the exterior, this may also be utilized as a mounting from the interior by simply reversing the details shown. Spline channel on Master Frame would still face outward in interior installations. Complete installation is performed from the interior or exterior dependent upon installation location.

Screen Panels or Walls are held in place over each structure opening and face screwed in place. A very straight forward installation.

MAJOR RESTRICTIONS & NOTES:
It is recommended that Panels or Walls be kept to a maximum of 96" in width due to weight and manageability of larger units during installation. If larger Panels or Walls are used, we highly recommend that a temporary starter strip be installed. It is also highly recommended that sufficient help is available during installation to lift and hold Panel(s) or Wall(s) in place until they can be fully mounted to structure. If your opening requires the installation of more than 1 panel over the opening "R" CHANNELS may be used to cover all panel seams. See "R" CHANNEL INSTRUCTIONS for details.

.pdf VERSION

Measuring...

Measuring for the standard face mount as follows:

1) Measure each opening height and width. Measure in several locations (top, middle, bottom, left side, center, right side, etc.) and record the largest measurements taken. (To help, you may find it better to draw out each opening and note the measurements and locations taken)

2) Determine the amount of overlap you would like for each side of each panel.

3) Add the overlap required to the largest opening measurements taken for each opening. Remember - to include the overlap required for all 4 sides. EXAMPLE: If you require a 1" overlap on each side of your panel, you'll need to add 2" to your opening width and 2" to your opening height. This would provide a 1" overlap on all sides of your manufactured panel.

4) The resulting sizes would be your true manufacture size for each panel or wall being ordered.

You can also modify this installation as required for your particular installation requirements.

Very Important...

In all cases, your submitted sizes are to be True Manufacture Sizes (TTT production sizes) required. We do not modify order sizes.

Also, all information and directions provided by CSW, Inc. should be treated as generic guides which are intended to help you plan, measure and order screens. Our directions are applicable and correct for a great majority of situations - but not all. In some situations they may need to be modified. In some situations they may not be applicable at all. The responsibility to determine this and the responsibility to order items correctly rests solely on the customer. We make no guarantee, warrantee or promise of any kind that the directions (guides) we provide will work in every application. Please read and understand all information provided on this web site. For additional information please review our POLICIES page fully.

Installation...

Proper planning is essential for trouble free installation. Installation of this system can be performed by most skilled persons. A general home improvement contractor will have no problem.

How to Obtain a Quote or Place an Order...

You can order raw material online or by fax / mail:
WEB STORE or FAX or MAIL

Orders for manufactured products must be quoted. Please submit your quote request ONLINE, by FAX or MAIL, or by calling (203.741.0859) or emailing (sales@connscreen.com) our office. We will not issue written quotations until you email (or fax) full project and contact information.