Remember, inserts can be installed at any time - Right away or years later. You should consider the following if considering inserts:

• First and foremost, we highly recommend that you keep all of your Screen Wall Panel openings to less than 48" x 96".  This would be the maximum size you would ever want to muscle around a tempered glass insert.

• Installation hardware can be installed at anytime. Would you like it installed at the factory or would you like to install yourself at a later date.

• We recommend that Inserts used are 3/8" extruded c-sash commercial dead lite panels w/t a pile weather seal (see 3 photos below). These will be available from any commercial glass shop. You may use other extrusions such as a 7/16" c-sash  - but special sized retainer clips will be required.

Other Uses...

Inserts need not only be glass. Shown here, our Master Frame is used as the permanently mounted frame and the insert used is a screen insert.  In this application, the screens need to be removed on a regular basis for cleaning. By using the set up shown, our customer can easily perform weekly required cleaning.